Pick, Triangular, Rounded Hook (Tools HT-UG & HT-U)

FINE GENERAL PURPOSE PICKs THAT ARE VERY SUITED FOR VACUMATIC FILLING UNIT PELLET REMOVAL AND FEED CHANNEL CLEANING, DEEPENING AND WIDENING (To adjust flow) .  (Note: you need to use a bud burr - available/listed below - to put a tiny hole in the old pellet before using these tools if you're using them to remove a pellet).

These tools are also ideal for cleaning or enlarging ink channels in feeds.

We offer two types of these, one with a triangular cross section on each end (HT-U), and a new version with both triangular and round cross section tips on opposite ends of the same handle (HT-UG). If you’re new at Vacumatic filling unit pellet removal, you probably want to use the circular cross section.  It’s a little less capable of doing damage than the one with a triangular cross section on the tip.   The triangular one is a little more useful, but only in the right hands.  If you’re not good with tools or just beginning, use the round cross section pick.  The triangular one grips the pellet much better, and the pellet will be more likely to rotate with the pick to ease it out.  But the sharp edges of the triangular cross section can do damage to the hard rubber socket if you’re not real careful. Made from German Stainless steel.