PARKER CAP BUSHING CENTER PIN SCREW DRIVER (Tool #13732)

PARKER CAP BUSHING CENTER PIN SCREW DRIVER/WRENCH.  This is another duplication of an original Parker tool crib wrench that is guaranteed to improve your quality of life. This will self center and safely remove (without damaging the clip ring) the bushing that holds the clip onto the cap of Parker fountain pens (Vacs & 51s), ballpoints, and some pencils that have jewels (Clip screws) and bushings holding them together. Like the Parker original, it has a spring-loaded, retracting center pin to fit into the hole left after the clip screw (jewel) is removed. AND if the plastic threaded shaft from the clip screw / jewel has broken off inside the bushing, the spring action of the aligning center pin causes it to retract so you can still unscrew the bushing. A pleasure to use, especially after you've kept mis-placing that exact sized, still square edged screw driver that would fit some of the Parker bushings you encounter (but it would still scrape some of the gold off of the clip ring).

Pairs with our MC tool & Tool 8057 .