Miscellaneous Parker Parts

ITEM #6390: PARKER 180 FOUNTAIN PEN NIB/FEED. GOLD NIB ONE SIDE IS XF, THE OTHER SIDE IS MEDIUM. THIS NIB WRITES IN 2 LINE WIDTHS, DEPENDING ON WHICH SIDE IS ON THE PAPER. THIS IS SIMILAR IN APPEARANCE TO PARKER CLASSIC NIB, BUT THE 180 NIB WRITES ON BOTH SIDES. IN ORIGINAL PACKAGING W DIRECTIONS.

HAVE MULTIPLE $35

#6390: PARKER 180 NIB/FEED. GOLD NIB ONE SIDE IS XF, THE OTHER SIDE IS MEDIUM. THIS NIB WRITES IN 2 LINE WIDTHS, DEPENDING ON WHICH SIDE IS ON THE PAPER. IN ORIGIONAL PACKAGING

To buy please email Pentooling. Be sure and provide a shipping address so a shipping cost can be calculated. Also, please make sure that paypal has your current shipping address as we use them to generate shipping labels.

ITEM #6288: PARKER SOLID 14K TWIST PENCIL TIPS. Accommodates 0.036" leads.

$25

6288 PARKER 14K TWIST PENSCIL TIP

6288-6289: PARKER SOLID 14K TWIST PENCIL TIPS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #5926: PARKER SONNET NEW OLD STOCK CAPS.

The following letter designations are pens: G, H, N, P (P has sold), S. T, U, V, X, Y. (N has no clip, it's a shell only and U and X have sold).

The following letter designations are for pencil caps: A, B, C, D, E, F, J, K, L, M, Q, R.

Specify the letter designation when ordering.

PEN CAPS $35

PENCIL CAPS $20

PARKER SONNET NEW OLD STOCK CAPS

WE ARE OUT OF U, W and Y ABOVE

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #DUOVEST: PARKER DUOFOLD VEST POCKET PEN/PENCIL BLIND CAPS / RING TOPS. Mostly NOS blind caps and caps for small Parker Vest Pocket pens and pencils. These parts are in various states of completion; The first photo shows what they are used on, but the pencil barrels and front ends are not part of the items for sale here; they are in the photo to demonstrate what these parts are for. What's for sale here are the top parts (caps, blind caps, and eraser covers) of Vest Pocket pens / pencls.

( Those pinkish-orange round dots on some of the pieces are Parker price stickers.)

PARKER DUOFOLD VEST POCKET PEN/PENCIL BLIND CAPS / RING TOPS

The first two items (A&B, above,) are complete caps (without clips) for vest pocket fountain pens.

A and B (above): $ 45

The next category of parts are complete ring top blind caps ( C thru G) for Parker vest pocket pencils in hard to find colors.

C thru G (above): $ 50

PARKER DUOFOLD VEST POCKET PEN/PENCIL BLIND CAPS / RING TOPS

The next grouping (above, H thru Q) consists of blind cap shells (for Parker vest pocket pencils) with screw-in top black tassies with a threaded hole for a ring top screw.

$ 45

PARKER DUOFOLD VEST POCKET PEN/PENCIL BLIND CAPS / RING TOPS

The last category (R thru AB, above) are blind cap shells only (for Parker vest pocket pencils) with no top black tassies or ring tops.

$40

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #301 PKRLEADCART+: PARKER PENCIL LEAD CARTRIDGE WITH (2) NEW, SOFT USABLE ERASERS AND (12) .046"(1.1mm) LEADS. These are found mostly in Challenger pencils and the erasers are usually hard as a rock. Not so here; these have been stored in a steel, capped tubular case, away from the elements and the erasers are still clean, supple, soft and usable. Sorry, these are sold as an assembly only and the smaller cartridge is not sold without the larger cartridge.

$20 per large tube with smaller tube inside

PARKER PENCIL LEAD CARTRIDGE WITH (2) NEW, SOFT USABLE ERASERS AND (12) .046"(1.1mm) LEADS

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #301 PKRLEADCART: PARKER PENCIL LEAD CARTRIDGES / ERASER HOLDERS. Usually found in Challengers. Straight & clean. except E and F which have a small amount of paint peeling which shows in the photo. These cartridges are not full.

A thru D: $15 ea

E & F: $10 ea

PARKER PENCIL LEAD CARTRIDGES / ERASER HOLDERS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #301 ALUM PNCL CART: PARKER ALUMINUM LEAD CARTRIDGE. Pulled out of a few old Challengers.

$10 ea.

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #61CARTCONN: PARKER 61 CARTRIDGE PEN CONNECTOR . This won't turn your capillary 61 into a cartridge 61. The threads won't work in a way to let you do that. I'll say that again; this won't turn your capillary 61 into a cartridge 61. The front shell threads will fit but the rear barrel threads won't fit. It's intended to replace a broken or missing connector out of a cartridge 61 (only). This is an original Parker repair part. Includes cartridge puncture tube. I got these from the guy that ordered them from Parker.

$30

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #BUSH 3-56: PARKER CLIP BUSHINGS. These have the more commonly used smaller diameter inner threaded hole. The outer thread fits most standard sized Parker fountain pens and also pencils and ballpoints.

To buy please email Pentooling. Be sure and provide a shipping address including city and state/province so we can calculate shipping costs and get your order to you. Ande please make sure that Paypal has your correct shipping address as I use them to geneerate my shipping labels.

ITEM #P ARROW NIB: POINT ASSEMBLY FOR PARKER ARROW. New old stock. Available in XFine (63), Medium (66), and Broad (67)

$20

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #P CLASSICNIB: PARKER CLASSIC NIB. (Not to be confused with 180 nibs). Available in Gold and steel. Steel is available in Fine, Broad and Medium and gold is available in Fine & Medium.

GOLD $25

STEEL $15

PARKER CLASSIC NIB

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #6468: P SONN INSIG FEED: FEED FOR PARKER SONNETS AND INSIGNIAS. Both pens use the same feed. These feeds are all marked with the nib grade they came with, but functionally they are the same. , 0.25" diameter, x 1.85" long. 1000-4-C

$12

FEED FOR PARKER SONNETS AND INSIGNIAS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #REDBND CONN: NEW CONNECTORS FOR PARKER REDBANDS. This part goes between the barrel and the shell / hood of a Redband (it won't convert a standard 51 to a redband).

$40

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #PRKRLEDS: PARKER WRITEFINE LEADS. .036" (.9mm). Approximately 24 leads per box.

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #T1 CLUTCH: PARKER T1 CLUTCHES. Used to hold the cap onto the pen. These parts are straight or curved into a 'C' shape (the 'C' shape is what you roll them into to use them). Parker factory repair parts.

$20

PARKER T1 CLUTCH REPLACEMENT

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #T1FEED: PARKER T1 FEEDS. And yes, they are red. Another parker shop trial. They work the same as the black ones and are the same color as the inserts in the tassies of T1s. New and never used.

$50

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #5472: PARKER INTERNATIONAL DUOFOLD MEDIUM, TWO TONE NIB. 18K. Straight and smooth. 1.25" long, 0.29" wide at shoulders.

$125

PARKER INTERNATIONAL DUOFOLD MEDIUM, TWO TONE NIB

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #61 MEMBRANE: PARKER 61 CAPILLARY FILLING UNIT MEMBRANE - NEW OLD STOCK FACTORY REPAIR UNIT. This item is a pristine, never used, Parker factory issued artifact. While it would certainly do a great job at making a 61 work, it's more suited as a Parker relic. Parker sent these to its authorized repair men. It comes in a small plastic tube that Parker packed it in back then.

$60

PARKER 61 CAPILLARY FILLING UNIT MEMBRANE - NEW OLD STOCK FACTORY REPAIR UNIT

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #61 INK: PARKER INSTANT INK FOR 61 PENS. This was part of the revolutionary goodness inherent in the development of the 61; you didn't need to carry liquid ink around with you, but you COULD always have ink with you if you had water. Just put this capsule on the end of your filling unit, put it in water for 30 seconds, take it off, put your pen back together and you're all set to write like a scribe.

$15 ea

PACKAGE OF PATRKER 61 INSTANT INK

PARKER 61 INK CAPSULE

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #45NIB: STEEL 45 NIBS ARE AVAILABLE W/FEEDS & COLLARS, PRICED AS FOLLOWS:

BROAD $20, MEDIUM $12, FINE $15, XFINE $20

SPECIFY WIDTH DESIRED. We also have 45 nib collars available for $8.

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #BUTTON: BUTTONS FOR PARKER BUTTON FILLERS. Specify brass, nickel, or aluminum. Please note that the aluminum ones are NOT the same as those used in the Parker VS.

$8 brass

$10 nickel

$5 aluminum

BUTTONS FOR PARKER BUTTON FILLERS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #HANGING PRES BAR - 3 SIZES: HANGING 3 PIECE PRESSURE BAR FOR PARKER BUTTON FILLERS. These are reproductions of all three sizes of Parker's hanging pressure bars for its button fillers. The sizes of pressure bars that a given size of pen uses overlaps a great deal. The medium size fits a wide range of fountain pen sizes from Duofold Seniors to small sized Challengers and it was the only size supplied to Parker's repair people in the end. See the second photo below; the numbers on the pens indicate the volume of ink taken in by the pen shown with the medium pressure bar in it. All these are quite riteous volumes of ink for the given pen.

For these pressure bars to work, you'll need to be able to pass a No. 12 drill through the hole in the top of the barrel to clean it out and adjust for any shrinkage and crud build up that has occurred over the ages (I find this to be required even when re-using an original Parker 3 piece pressure bar). This type of pressure bar frequently results in less force being required when pushing the fill button down, which greatly alleviates the chances of an accident with an open ink bottle. The drill shown at the bottom of the photo is a no. 12 and is shown as the next item in these listings. These bars won't work in Pastels; there's not enough diameter under the barrel collar for a 3 piece pressure bar to expand in a Pastel.

The sizes are shown in the first photo below, and as pointed out above, there is quite an overlap in the sizes that will fit a given size pen. Just try to get the length from the top of the button to the section of the pen and don't exceed it with the pressure bar length.

When ordering, specify the size you want as "BAR A", "BAR B" OR "BAR C".

$5 ea.

HANGING PRESSURE BARS FOR PARKER BUTTON FILLERS - ALL THREE SIZES PARKER BUTTON FILLER 3 PIECE PRESSURE BARS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #BAR P- A FOURTH SIZE OF HANGING PRESSURE BAR FOR PARKER BUTTON FILLERS. In Parker's small size. 2.27' total length. Fits between Parker Bar B & Bar C. NOS found on Fred Krinke's table at the LA Pen show. Hard to find.

ITEM #BAR P- SHORT: HANGING 3 PIECE PRESSURE BAR FOR PARKER BUTTON FILLERS. In Parker's small size. 2.27' total length. Fits between Parker Bar B & Bar C. NOS found on Fred Krinke's table at the LA Pen show. Hard to find

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #BUTTON: BRASS BUTTONS FOR PARKER BUTTON FILLERS.

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #45NIB: STEEL 45 NIBS ARE AVAILABLE W/FEEDS & COLLARS, PRICED AS FOLLOWS:

BROAD $20, MEDIUM $12, FINE $15, XFINE $20

SPECIFY WIDTH DESIRED. We also have 45 nib collars available for $8.

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #PKR CONV: PARKER PISTON CONVERTOR, FOR STANDARD SIZED PENS. total length = 2.88", Diameter of front insert = .173", hole diameter = .123". Clean and unused. Smokey translucent tube.

$15

PARKER PISTON CONVERTOR

To buy please email Pentooling. BE SURE TO INCLUDE YOUR SHIPPING ADDRESS SO WE CAN PROVIDE A PRICE WITH SHIPPING COSTS INCLUDED.

ITEM #75 NIBs: PARKER 75 NIBS, USED. Available in XFINE, MEDIUM, BROAD. We don't have numbered nibs; less than 5% of 75 nibs I find have numbers; rather, they are more often marked "F", "M", "B", etc.

XF, FINE, MEDIUM,$75 each

BROAD, $80 each

new old stock parker 75 fountain pen nibs

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #75 FAT NIB/FEEDs: PARKER 75 FAT NIB/FEED ASSEMBLIES. These are later, French made units using a larger diameter feed than the earlier US made 75s used. Available in Fine and XFine only.

Fine $75 ea.

XFine $80 ea.

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #75 SEX: SECTIONS FOR PARKER 75 FOUNTAIN PENS. This section is for the large diameter feed. Nib/feed assemblies are not included with item; they are in the picture so you can tell which diameter nib/feed assembly FITS.

"A" SOLD OUT $100 SOLD OUT

B: $50

75 sections

75 SEX: SECTIONS FOR PARKER 75 FOUNTAIN PENS

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #VPNIB: If you're looking for a VP nib,Click to get pricing on nibs alone or to see which nibs are available...-use your browser's back arrow to return here

$AS NOTED ON REFERENCED DOCUMENT

PARKER VP NIBS!!

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM # 75BP MECH: PARKER 75 CAP ACTUATED BALLPOINT MECHANISM. New old stock. Use tool #MC to help in the installation or removal of this part.

$30

PARKER 75 CAP ACTUATED BALLPOINT MECHANISM

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #75 CLIP: CLIPS FOR LATER PARKER 75 FOUNTAIN PENS. NEW OLD STOCK. These fit the later cap actuated 75s such as the Lacquer on metal caps. They won't fit the older Cisele caps.

Specify gold plated or chrome.

$25

CLIPS FOR LATER PARKER 75 FOUNTAIN PENS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #75 CLUTCH: PARKER 75 FOUNTAIN PEN CLUTCH. Goes inside the cap, over the edge of the inner cap and holds the pen in the cap. New Old Stock.

$15 ea.

PARKER 75 FOUNTAIN PEN CLUTCH

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #75 TASSIE: TASSIE FOR PARKER 75 FOUNTAIN PEN. 0.316" diameter at largest ring layer. o.d. of thread = 0.150". New old stock.

$15

TASSIE FOR PARKER 75 FOUNTAIN PEN

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #61 INK: PARKER INSTANT INK FOR 61 PENS. This was part of the revolutionary goodness inherent in the development of the 61; you didn't need to carry liquid ink around with you, but you COULD always have ink with you if you had water. Just put this capsule on the end of your filling unit, put it in water fot 30 seconds, take it off, put your pen back together and you're all set to write like a scribe.

$15 ea

PACKAGE OF PATRKER 61 INSTANT INK

PARKER 61 INK CAPSULE

To buy please email Pentooling. Be sure to include a shipping address so you can get a cost for shipping.

ITEM #PARKER ERASERS: NEW ERASERS FOR PARKER .5mm ARROW PENCILS. 4 Erasers per pack. Base is 4.65 mm dia. Top plastic dia. is 6.73mm. Eraser is 4.9 mm dia. I also have (6) eraser packs for Classics & Jotters with following diameters: Base is 4.41 mm. Top lip is 5.8 mm. Eraser is 3.3 mm.

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #PENCIL CONVERTOR: CONVERT YOUR PARKER BALLPOINT INTO A MECHANICAL PENCIL WITH A CARTRIDGE PENCIL REFILL. Available in .5mm , .7 mm, and 1 mm (NOT .9mm or 1.1 mm - rumor has it that Parker did this on purpose). These Fit in the same cavity as a Parker ballpoint refill.

$35 ea

PARKER BALLPOINT TO PENCIL CONVETTERS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #PARKER VP PENCIL BARREL:

$ASK

PARKER VP PENCIL BARRELS

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

ITEM #VP SNOUT: PARKER VP ACRYLIC FILLING UNIT FRONT END. This is a left over original Parker factory part. Parker's idea when designing the filling unit that this is the most critical part of was to keep the front end of your pen and your fingers clean while filling your pen, similar to the idea behind Sheaffer's Snorkel. You were supposed to pull the filling unit out of the pen and fill it by dipping the narrow end of this snout into the ink bottle while pumping the Aerometric type filling unit pressure bar. This didn't work well because the acrylic snout would frequently break during the above operation. If you have a VP that is leaking in front, chances are good that there is a very tiny crack in this part. This wasn't intended to be a user changed part, but if you're careful, you can get the old unit apart, put a sac on this snout, re-assemble the filling unit, and be good to go. If you remind me, I'll include a new tapered PVC sac.

OUT OF STOCK $45 OUT OF STOCK

NEW OLD STOCK PARKER VP FILLING UNIT ACRYLIC FRONT END

To buy please email Pentooling. PLEASE BE SURE AND PROVIDE A SHIPPING ADDRESS SO SHIPPING COST CAN BE CALCULATED.

ITEM #6224: PARKER DUOFOLD INTERNATIONAL FOUNTAIN PEN CAP IN BLACK.

SOLD in 2024 SOLD $125 SOLD SOLD

ITEM #6224: PARKER DUOFOLD INTERNATIONAL FOUNTAIN PEN CAP IN BLACK.

ITEM #6375: PARKER SONNET NIB & FEED. 18K NIB IN DOUBLE BROAD.
Feed diameter 0.25"/ 6.29mm.

$90 SOLD AMERICAN!!!

6375: PARKER SONNET NIB & FEED. 18K NIB IN DOUBLE BROAD

ITEM #6374: PARKER SONNET NIB ONLY IN BROAD. TWO-TONE CROSS HATCH PATTERN IN 18K.

SOLD in 2024 SOLD $60 SOLD SOLD

6374: PARKER SONNET NIB ONLY, BROAD

6374: PARKER SONNET NIB ONLY, BROAD. TWO-TONE CROSS HATCH PATTERN IN 18K.

ITEM #tbd:

$xxx

To buy please email Pentooling. Be sure and provide a shipping address, so we can calculate shipping costs. please make sure that Paypal has your correct shipping address as we use them to geneerate shipping labels.

Return to TOP